Polyurethane base UV thermoset ink is digitally printed onto custom formulated B-stage (uncured) thermoset polyurethane resin that has been coated onto reusable textured casting release film.  The printed B-stage film is placed in a panel mold with recycled fillers and reinforcement.  Bio-based urethane resin is infused into the mold via Vacuum Assisted Resin Transfer (VARTM).  The infusion resin and the printed B-stage polyurethane film combine creating a monolithic resin panel. The exothermic reaction of the infusion resin generates heat-approaching 270°F (130°C) which starts the curing process.  A heated table continues heating the mold at the same temperature after the exothermic reaction to post cure the panel insuring maximum cure.